These are the instructions to flash Samsung Stock ROM (original firmware) using Odin on Windows Computer.
Flash Samsung Stock Rom using Odin
Step 1: Download and install Samsung USB Driver on your computer. In case you have already installed the Samsung USB Driver on your computer then Skip this step.
 |
| USB Driver |
Step 2: Download (Stock ROM compatible with your device) and extract it on your computer. After extracting you will be able to see these kind of files:
 |
| Samsung Galaxy Stock ROM |
Step 3: Now, Enable USB Debugging on your Samsung Galaxy Device.
To enable USB Debugging : Open
Settings >
Developers Option >
USB Debugging >
Tick to enable.
(Developers Option is hidden for Android 4.2.2 or above, to show the developer option Go to
Settings >
About Phone >
Built Number (Tap on it for 5-8 times).
 |
| Enable USB Debugging on Samsung Stock |
Step 4: Power Off your Samsung Device.
 |
| Power Off Samsung Galaxy |
Step 5: Now, you have to boot into Download mode. To boot into Download Mode: Press and Hold
Volume Down Key,
Home Key and
Power Key. When phone vibrates
Leave the
Power Key but Keep holding the
Volume Down Key and
Home key. You will boot into the Download Mode.
Step 6: In the Download mode you will be able to see a Warning Yellow Triangle Sign. In this situation you have to press the Volume up key to continue.
 |
| Samsung Galaxy Warning Sign |
Step 7: Download and extract Odin on your computer. After extracting you will be able to see the following files:
 |
| Odin files for Samsung Galaxy |
Step 8: Now, Open Odin3 and connect your phone to the computer.
 |
| Open Odin3 for Samsung Galaxy |
Step 9: Once you have connected the phone to the computer, Odin will automatically recognize the device and show “
Added” message at the lower-left panel.
 |
| Samsung Galaxy Added to Odin |
Step 10: Once your device is detected by Odin, click on the “
PDA” button and select the
tar.md5 file that you have extracted in
Step #2.
 |
| Add PDA File in Odin |
 |
| Select PDA file |
Step 11: Now, click on the “
Start” button in Odin to begin the Flashing process.
 |
| Start Flash in Odin |
Step 12: Once you see, the
Green Pass Message then remove the USB cable from the device (during this process, your device will restart automatically).
 |
| Start Flash in Odin |
Step 13: Your Samsung Device will now stuck at boot (boot loop). Now, You have to
boot into Stock Recovery Mode, To
Enable Stock Recovery mode: Press and Hold
Volume UP key,
Home Key,
Power Key. When phone vibrates
Leave the
Power Key but Keep holding the
Volume UP Key and
Home key. You will boot into the Recovery Mode.
 |
| Recovery Mode on Samsung Galaxy |
Step 14: In Recovery Mode,
Wipe Data/factory reset.
Step 15: Once Cache Data is cleared, Select Restart Phone Now from the recovery menu.
 |
| Reboot System Now from Stock Recovery Mode |
Step 16: Now, your Samsung Device will restart without any issue with the Stock Rom you have flashed.
